Set of 2 battery cells for the Sherpa Power Barrow and Enviromower Cordless Mower.
* Without caddy - naked batteries only
* 12v / 10ah
* Set of 2
* Easy to fit
Undo the retaining screw and remove the front
Replace the old cells
Instructions for fitting:
* Place the new cells in the caddy exactly as shown in the picture.
* Connect the small short wire to the Red and Black connectors that are next to each other.
* Then connect the red wire to the red terminal on the left.
* Connect the black wire to the black terminal on the right.
* Close up the caddy and tighten the screw. (a T-15 torx bit or 2.5mm Allen Key is required)
